Lesson 9

This lesson I did lots! Firstly I hammered the axis into white plastic gear plate. This was quite difficult as the hoke was small and I had to stretch it to be able to get the axis through the hole. I placed the gear plate in the clamp and then with a hammer slowly hammering the axis in. At first it was just stretching and then the axis actually started to go through the hole and soon it was poking out the other side. I then repeated this process on the other side. Next I had to hammer the wheels onto the axis. This was easy as I just held the axis in the whole and hammered hard. I repeated this step for the wheel on the other side.